Electric Car Home home

Understanding Heat Pumps

How do heat pumps work?

See how warmth from the outside air becomes heating and hot water inside your home.

An air source heat pump in action

Inside your home

A fan draws air over a coil inside the outdoor unit. Refrigerant collects heat from the air and transfers it to a separate water circuit.

In room heating mode, the heated water flows to your radiators and/or underfloor heating. Once it has released heat into your rooms, the cooler water returns to the heat pump.

Outside · the heat pump

Shower Radiators Hot water cylinder Underfloor heating 1234 Electricity in
1234 Electricity in

Inside your home

Shower Radiators Hot water cylinder Underfloor heating

Hot flowAfter releasing heatCooler flow

What happens inside the heat pump?

  1. Collects heat

    A fan draws air over the evaporator coil. The refrigerant absorbs heat and changes from liquid to gas, even when the air outside feels cold.

  2. Compresses the gas

    An electric compressor increases the refrigerant’s pressure and temperature. It compresses the refrigerant, not the outside air.

  3. Transfers the heat

    The hot refrigerant gives up heat to a separate water circuit and condenses back into liquid. The two fluids do not mix.

  4. Cools and repeats

    The expansion valve lowers the pressure. The refrigerant cools into a liquid/vapour mixture, ready to collect heat again.

The essentials

Move heat from outside to inside.

Electricity powers the heat pump. Outside air supplies heat.

The air outside contains heat all year round, even on a cold winter’s day. A heat pump collects some of this warmth and uses electricity to raise it to a useful temperature for your home. Heated water carries that warmth to your radiators, underfloor heating or hot water cylinder. Once it has given up some of its heat, the water returns to the heat pump to be warmed again.

Gentle, steady heating starts with a good design.

The installer calculates how much heat each room needs and checks the radiators or underfloor heating. A system that can keep you comfortable with a lower water temperature can work more efficiently. Your controls can adjust that temperature as the weather changes.

Will it work when it is cold outside?

Yes. There is still heat available in cold air. The unit needs to be selected for your home’s heat loss at the local winter design temperature. Output and efficiency vary with the weather and the required water temperature; occasional defrost cycles are normal.

Will I need new radiators or a hot water cylinder?

Some radiators may already be suitable; others may need to be larger. Ask for a room-by-room assessment. You may also need a new hot water cylinder if you do not already have one, or if your existing cylinder is not suitable for a heat pump. Ask your installer to check this and include the cylinder’s size and location in the design.

How does the heat pump switch between room and hot water heating?

The controls switch between the two automatically. When the hot water cylinder needs heating, a valve directs warm water from the heat pump through a coil inside the cylinder. Many systems briefly pause room heating while the cylinder heats up. Once the cylinder reaches its target temperature, the heat pump can return to heating the rooms if needed.

Can it cool the house as well?

Domestic air source heat pumps – technically known as air-to-water heat pumps – covered in this guide heat your rooms and provide hot water. They don’t provide cooling.

There is another type of heat pump – air-to-air heat pumps – which are more commonly referred to as air conditioning. This type of heat pump can both cool rooms in summer and heat them in winter.

Explore cooling and air conditioning

What is a ground source heat pump?

A ground source heat pump uses warmth stored in the ground to heat your home and hot water. A loop of pipes, buried in trenches or lowered into boreholes, collects that warmth and carries it to the heat pump. It works on the same principle as an air source heat pump, but takes its heat from the ground instead of the outdoor air. Installing the ground loop needs suitable space and access, or a connection to a shared loop. Ground source systems usually cost considerably more to install than air source heat pumps, largely because of the ground works involved. Air source heat pumps are the most common choice for UK homes.