Electric Car Home home

Heat Pump Cost Calculator

How much does a heat pump cost?

Start with your number of bedrooms. Explore an installation estimate, then see how a potential grant could reduce what you pay.

How many bedrooms do you have?

Your home’s number of bedrooms provides a quick estimate.

Illustrative installation cost

£13,000

Before any grant – see below for grant eligibility

Allow a range of

£11,100-£15,600

An accurate quote depends on equipment choice, whether radiators and/or cylinder need replacing, your home’s layout, and other factors discussed with you at survey.

Based on a 3-bedroom semi-detached house in England, some insulation and a mains gas boiler (fine-tune assumptions below)

What goes into the cost?

Illustrative air source heat pump installation costs before the grant
Item% of totalEstimated cost
Air source heat pumpThe outdoor unit; its size and output are confirmed after a heat-loss survey40.0%£5,200
Hot water cylinderNew compatible cylinder and fittings included13.1%£1,700
Radiator changesAllowance for upgrading some existing radiators; survey confirms what is needed9.2%£1,200
ControlsHeating and hot water controls3.5%£450
Plumbing and materialsPipework alterations, valves, insulation and base, plus a buffer tank or volumiser, pump, expansion vessel and filter where required9.2%£1,200
Electrical workSupply, protection and connections5.8%£750
Installation and commissioningHeat-loss survey, system design, fitting, testing, balancing, handover and MCS certification. Removal of your old boiler is generally included19.2%£2,500
Installed total cost before grantBefore any grant – see below for grant eligibility100%£13,000

Illustrative figures, not an installer quote. Includes a new hot water cylinder, an allowance for upgrading some radiators, and removal of your old boiler. Not included: insulation upgrades, any upgrade to your electricity supply or main fuse, underfloor heating and redecoration. Percentages relate to the installed total and may not sum to exactly 100% after rounding.

Help with the upfront cost

Find out if you can get the heat pump grant

How do you currently heat your home?
Where is the property?
Installed total cost before grant£13,000
Less potential Boiler Upgrade Scheme (BUS) grant£7,500
Cost after potential grant£5,500

Illustrative installed cost range after the grant: £3,600 – £8,100

You could get a £7,500 heat pump grant

You’ve selected mains gas for a home in England. The Boiler Upgrade Scheme offers £7,500 towards an eligible air-to-water heat pump installation in England or Wales. Your installer can confirm whether you meet all of the eligibility criteria.

Fine-tune your estimateAdjust the details to match your situation.

These answers adjust the installation allowances. Insulation improvements are not included in the price.

How this estimate is calculated

The starting illustration is £13,000 before grant for a three-bedroom semi-detached home with some insulation and an existing boiler and radiators. The itemised total includes the heat pump, a new cylinder, radiator changes, controls, plumbing, electrical work and labour. These are sample allowances, not current market prices.

More bedrooms increase the equipment and installation allowances. Property type and insulation adjust the equipment allowance; little insulation also increases the radiator allowance. Replacing electric panel or storage heaters adds a complete radiator and pipework system. The estimate allows £200 more for installation and commissioning when replacing storage heaters. Mains gas, heating oil and LPG use the same existing-radiator assumption.

The range before grant runs from 15% below to 20% above the itemised total, with each end rounded to the nearest £100. It illustrates uncertainty; it is not a measured market range or a guarantee. Bedrooms do not determine the heat pump output. A heat-loss survey and installer quote are needed.

Any potential grant is deducted from the itemised total and both ends of the rounded range. This is not a grant application or a complete eligibility check. Insulation improvements, extensive building work, ground loops and specialist electrical upgrades are outside the example. Ask your installer to confirm the final price, including any applicable tax.

The essentials

Understand the installation.
Then consider the grant.

The heat pump itself is just one part of the price.

A good quote should itemise the cost of the cylinder, controls, pipework, electrical work and any radiator changes, as well as the outdoor unit. Ask what is included in commissioning, making good and removing the old equipment.

Size follows heat loss, not guesswork.

A bigger unit is not automatically better. Your installer should explain the output needed in cold weather and how the system will run when the weather is milder. Bedrooms give you a quick starting estimate of installation cost. Property type, insulation and existing heating help refine it. These answers alone do not size the heat pump. A heat-loss survey is vital and confirms the specification.

Is the grant guaranteed?

No. Your installer must confirm the property, equipment and installation meet the current rules and manage the application. The calculator shows a potential deduction, not an eligibility decision. Ask for your quote to show the price before the grant, as well as with the grant.

Are these current installation prices?

These figures illustrate how an installation can be itemised and provide a rough guideline as to price. They are not an installer quote or a live price list. The final cost depends on your home, equipment and the work required. Ask installers for detailed written proposals.

Are ground source systems priced the same way?

No. A ground loop needs trenches, boreholes or access to a shared loop, so the site works can make the costs quite different. This calculator covers air-to-water heat pumps only. Request a separate site-specific ground source quote if you are interested in a ground source heat pump.